Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Fume Hoods 1128 Series - Manuel (Page 48)

Chapter 7: Modifying Your Protector XL
Product Service 1-800-522-7658 44
Original instructions
Sash Stop Kit – Field Installation P/N 9410300
The sash stop kit restricts how far a vertical-rising sash may be opened. This
small plastic device may be easily field installed on the fixture corner post of any
fume hood.
Installing an Electrical Duplex Outlet
Your Protector Fume Hood can be ordered with duplex outlets, however, if you
ordered a model without an electrical duplex outlet you can have one installed in
the field by a qualified electrician. Contact Labconco Customer Service for
ordering information. (Not acceptable on explosion-proof hoods).
Votre Protège-capot de fumées peut être commandé avec prises doubles,
cependant, si vous avez commandé un modèle sans prise de courant duplex, vous
pouvez en faire installer sur le terrain par un électricien qualifié. Contactez le
service clientèle Labconco pour commander. (Non acceptable sur antidéflagrants
hottes).
Figure 7-6