Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Fume Hoods 1128 Series - Manuel (Page 11)

Product Service 1-800-522-7658 7
Original instructions
C
HAPTER
2
P
REREQUISITES
Before you install your floor-mount laboratory fume hood, you need to prepare
your site for installation. Carefully examine the location and floor where you
intend to install your floor-mounted hood. You must be certain that the area is
level and of solid construction. In addition, a dedicated source of electrical power
must be located near the installation site.
Carefully read this chapter to learn the requirements for your installation site:

The location requirements.

The support requirements.

The exhaust requirements.

The electrical power requirements.

The service line requirements.

The space requirements.
Refer to Appendix B: Protector XL Floor-Mounted Hood Dimensions for
complete fume hood dimensions.
Refer to Appendix C: Protector XL Floor-Mounted Hood Specifications for
complete laboratory fume hood electrical and environmental conditions,
specifications and requirements.