Panasonic DVD-K520D - Manuel (Page 55)

Symptom (DVD) Remedy
No subtitles. •Subtitles appear only with discs which contain them.
•Subtitles are cleared from the TV monitor. Perform the steps on page 39 to
display the subtitles.
Alternative audio soundtrack (or subtitle)
languages fail to be selected.
•An alternative language is not selected with discs which do not contain more than
one language.
• In the case of some discs, the alternative language cannot be selected by
operating the AUDIO or SUBTITLE button. Try selecting it from the DVD menu if
one is available.
Angle cannot be changed. This function is dependent on software availability. Even if a disc has a number of
angles recorded, these angles may be recorded for specific scenes only (when
“ANGLE” lights up on the player’s FL display).
Play does not start even when title is
selected.
Confirm the “2 Ratings” setting.
Audio soundtrack and/or subtitle
language is not the one selected at the
initial settings.
If the audio soundtrack and/or subtitle language does not exist on the disc, the
language selected at the initial settings will not be seen/heard.
The menu is displayed in French
(example).
The setup “3 Menus” of “1 Disc Languages” is set to French; select English.
The password for rating level has been
forgotten.
Reset all the settings to Factory
Preset.
While the player is in the stop mode, hold the player’s SKIP (h«) button and the
PAUSE button down simultaneously and then hold the OPEN/CLOSE button down
for longer than 3 seconds (until "Initialized” disappears from the TV monitor). The
lock will be released and all initial settings will return to the default values.
Symptom (Video CD) Remedy
No menu play. This function works only for Video CDs with playback control.
Self-diagnosis display function
When an error or trouble is detected during operation, a service number appears in the FL display.
When a service number appears, check out the details given below.
Service number Player status Remedy
n 1 1
U 1 1
Disc is dirty. Wipe the disc clean.
HOO
Trouble is likely to have occurred. The Press POWER to set the player to the standby mode and then
number following ‘ H" differs depending back to ON. Alternatively, press POWER to set the player to
U U stands on the status of the player. the standby mode, disconnect the AC plug, and then re-
for a number. connect it.
• If the service number fails to be cleared even when the remedial action is taken, ask the service technician to repair the player.
55