Sony RM-TP501E - Manuel (Page 22)

Adjusting the Commander's Operating Environment
Other setup
o
■ o
o
3
ISETUP
DISPLAY
I Ó FUNCTION&USER IR
t
FUNCTION HOOK UP
; ^
DOWNLOAD
[TOUCH PANEL-»1| BEEP: .ON OFF I
|i LCD AUTO OFF •♦] ALARM : ^ON
|: SYSTEtl STANDBY -»| ALL CLEAR -fj
■ Turning the amplifier display on or off
The displa\' on the cimpliher can be turned on and off.
Amplifier functions do not change rvhen the display is off.
Touch DISPLAY on the SETUP screen to turn
amplifier display on or off.
■ Adjusting the position of the touch panel
(LCD)
Adjust the position of the LCD when it shifts from the
normal operating position.
1 Touch TOUCH PANEL on the SETUP screen.
The TOUCH PANEL ADJUSTMENT screen appears.
2 Touch the center of each of the 4 dots.
(For details, see "Touch panel adjustment" on page 6.)
"Adjusted" appears in a short while and long beep is
emitted.
■ Setting the LCD to turn off automatically
■ The LCD backlight can be set to turn off automatically
after operation.
1 Touch LCD AUTO OFF on the SETUP screen.
The LCD AUTO OFF screen appears.
2 Touch + or - to set the desired turn off time.
The turn off time can be set between 1 and 10 minutes
in 1 minute intervals.
3 Touch EXIT.
Q To preserve battery life
Select a short turn off time in step 2.
■ Changing the function of the SYSTEM/STANDBY
button
ALL OFF: Switches power of all Sony AV components
off.
ON/OFF: Switi Ires only the amplifier on or off.
■ Setting the operation sound on or off
,'\ beep can be set to sound or not sound when the touch
panel is touched.
Touch ON (sound) or OFF (no sound) in BEEPtON
OFF in the SETUP screen.
■ Setting the warning alarm on or off
A warning alarm can be set to sound or not sound when a
communication error has occurred.
Touch ON (sound) or OFF (no sound) in ALARMiON
OFF in the SETUP screen.
■ Returning settings to their factory preset
settings
Use this function trr erase all memorized settings and
return them to their factory presets.
Please note that once erased, settings can not be returned.
When carrying out this operation, make sure that the amplifier's
power is on, and be sure to point the commander's transmitter/
receiver section toward the amplifier.
1 Touch ALL CLEAR on the SETUP screen.
2 Touch OK.
22 GB