Sony RM-TP501E - Manuel (Page 18)

Adjusting Sound Fields
o
T3
ID
To adjust the surround parameters
1 Touch SURR EDIT on the SOUND FIELD screen.
The SURROUNO screen appears.
SURROUND
SURROUND EFFECT:
MRFF TYPE :
REVERB TIRE
BBSS GRIN:
BBSS FREQUENCY:
100 %
S-0...
+ 10dB
'891Hz
•w
, + 1 t E X I T ]
2 Use JOG DIAL or touch A or T to scroll through the
list.
3 Push JOG DIAL to select an item or touch the
aspect you want to adjust.
4 Touch
value.
or I I to adjust to the desired
SURROUND EFFECT: Higher values increase the
"presence" of the surround effect.
WALL TYPE: Use to simulate different sonic
environments.
REVERB TIME: Use to control the spacing of the early
reflections to simulate a larger or smaller room.
Tone quality adjustments: Use these parameters to
adjust the overall sound quality of the selected ■
sound field.
5 Repeat steps 2 through 4 when there is more than
one aspect that you wish to adjust.
6 Touch EXIT when adjustment is finished.
Notes
• Items that cannot be adjusted due to the current speaker
settings or sound field mode are grayed out.
• If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.
To adjust the speaker levels
1 Touch LEVEL on the SOUND FIELD screen.
The LEVEL screen appears.
2 Use JOG DIAL or touch A or T to scroll through the
list.
3 Push JOG DIAL to select an item or touch the item
you want to adjust.
4 Touch 1 + I or I to adjust.
5 Repeat steps 2 through 4 when there is more than
one item that you wish to adjust.
6 Touch EXIT when adjustment is finished.
To adjust the speaker balance
Use TEST TONE to listen to the levels output from each speaker.
AUTO outputs the test tone to each speaker in order. You can also
select individual speakers to output the test tone. Adjust your
speaker levels so that the test tone is output at the same level
from all speakers.
Notes
• Items that cannot be adjusted due to the current speaker
settings or sound field mode are grayed out.
• If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.
18 QB