Sony RM-TP501E - Manuel (Page 14)

Example: Recording from CD to MD
o
■ 0
(C
0
3
I'his section describes how record audio from a CD to an
MD as an exanrpie of recording audio/x ideo.
Other operations
Recording from an LD to a \ ideo deck is basicalh the same
procedure 1
1
'l details on the buttons used in recording, refer to
the operating instructions supplied \vitri*Vhe amplifier and other
components.
1 Touch FUNCTION.
The FUNCTION screen appears.
2 Touch
The RFC EDIT screen appears.
3 Touch to select the player component (CD in this
example).
Because CD is not displayed, use the JOG DIAL or
touch ▼ to scroll downward through the list. If you
scroll to far, touch
A to scroll back up.
PLAYER
Touching A moves list up
Touching ▼ moves list down
When PLAYER is selected, the amplifier's function
automnticallv switches to the PLAYER component.
4 Touch to select the recorder component (MD/DAT
in this example).
When MD/DAT is touclied, the REC EDIT operation
screen appears.
5 Touching • in RECORDER; MD/DAT, then touch
in PLAYER: CD.
Starts playback from the CD player
Starts recording on the MD deck.
Recording starts.
The FUNCTION screen returns once the recording
finishes.
To stop recording at any time
Although recording stops automaticallv in the above
example, recording can also be stopped at any time by
touching ■ in RECORDER.
To stop the recording procedure at any time
Touch FUNCTION to display the FUNCTION screen.
During steps 2 to 3, touching EXIT will also stop the
recording procedure.
14
"^«