Sony MDS-JE630 - Manuel (Page 41)

Fade In and Fade Out
Finely controlling the pitch (Fine Control
Function)
You can fine control the playback speed in 0.1%
increments from -98.5% to +12.5%.
1 While the deck is playing, press PITCH CONTROL
repeatedly until "Pfine" appears in the display.
2 Turn AMS until the desired value appears.
To recall the factory setting
Press CLEAR.
Notes
• The playback sound drops out momentarily when you change
the fine control value.
• The fine control value re\’erts to “0%" (factory setting) when
you turn off the deck or eject the MD.
• The step and fine control values are linked; changing one value
also changes the other.
Q You can use Setup Menu to change the pitch
During play, select "Pitch" to set the pitch automatically in steps
or "Pfine" to finely control the pitch.
You can use Fade-in Play to gradually increase the signal
leyel to the LINE (ANALOG) OUT jacks and the PHONES
jack at the start of playback. Fade-out Play gradually
decreases the signal leyel at the end of playback.
Fade-in Recording gradually increases the signal level at
the start of recording. Fade-out Recording gradually
decreases the signal level at the end of recording.
©
o o o o o
O O O O O
O O O O O
O O O O O
O O O O O
O O O O O
o o o o o
0 0 0 0
1 c- I nn fTl
( S t S O Q
o o o Q
C h ) (5) S) y g
FADER
Note
The level of the signal output from the DIGITAL OUT connector
does not change during Fade-in Play nor Fade-out Play.
Fade-in Play and Fade-in Recording
During play pause (for Fade-in Play) or recording
pause (for Fade-in Recording), press FADER.
flashes in the display and the deck performs Fade-in
Play or Fade-in Recording for five seconds (factory
setting) until the counter reaches "0.0s."
•n
c
3
n
r*
o'
3
l/l
41'