Sony MDS-JE630 - Manuel (Page 29)

Tips for Recording From
MDs to Tape
MENU/NO AMS YES
I_____ ___ I
Inserting blanks between tracks during
play (Auto Space)
The MD deck can be set to automatically insert a three-
second blank between tracks during play. This function is
useful when you're recording from an MD to an analog
tape since the three-second blank enables you to use the
Multi-AMS function later to locate the beginning of tracks
on the tape.
1 While the deck is stopped, press MENU/NO twice,
"Setup Menu" appears in the display.
2 Turn AMS (or press (◄◄/►►) repeatedly) until
"Auto Off" appears, then press AMS or YES.
Turn AMS (or press (◄◄/►» repeatedly) to select
the setting, then press AMS or YES.
To Select
Turn on Auto Space Auto Space
Turn off Auto Space Auto Off (factory setting)
4 Press MENU/NO.
Q You can use the remote to turn on or off Auto Space ij
While the deck is stopped, press A.SPACE repeatedly until "Auto
Space" or "Auto Off" appears in the display.
Notes
• If you select "Auto Space" and record a selection containing
multiple track numbers (for example, a medley or symphony),
blank spaces will be created on the tape in between the various
sections.
• If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting ("Auto Space" or "Auto Off")
and recall it the next time you turn on the deck.
Pausing after each track (Auto Pause)
You can set the MD deck so that it pauses after each track
to give you time to locate the next track to be recorded.
1 While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display
2 Turn AMS (or press N◄/►►1 repeatedly) until
"Auto Off" appears, then press AMS or YES.
Turn AMS (or press repeatedly) to select
the setting, then press AMS or YES.
To Select
Turn on Auto Pause Auto Pause
Turn off Auto Pause Auto Off (factory setting)
4 Press MENU/NO.
To resume play after pausing
Press O.
Q You can use the remote to turn on or off Auto Pause ¡jj
While the deck is stopped, press A.SPACE repeatedly until "Auto
Pause" or "Auto Off" appears in the display.
Note
If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting ("Auto Pause" or "Auto Off") and
recall it the next time you turn on the deck.
fii
><,
5
'
(B
S
o
VI
29^