Sony MDS-JE630 - Manuel (Page 35)

Moving Tracks Naming a Track or MD
This function lets you change the order of any track.
Example: Moving the second track after the
third track
[4] DDD □ AAA
□ AAA
□ BBB
□ BBB □ DDD
After you move a track, the tracks are renumbered
automatically.
1 While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press N◄/►►1 repeatedly) until
"Move ?" appears, then press AMS or YES.
3 Turn AMS (or press l◄◄/►►^ repeatedly) until the
number of the track to be moved appears, then
press AMS or YES.
4 Turn AMS (or press N◄/►►1 repeatedly) until the
new track position appears, then press AMS or
YES.
"Complete!!" appears for a few seconds and the track
is moved. The deck starts to play, the moved track.
To cancel the operation
Press MENU/NO or ■.
Q You can undo the track move
For details, see "Undoing the Last Edit" on page 39.
You can enter a name for a recorded MD as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers, and symbols. A total number
of 1,700 characters can be stored for all the names on the
MD.
LEVEL/DISPLAY/CHAR MENU/NO YES */»
m
Q
H
3
(Q
X
ID
n
0
a
ID
a
<
c
Note
If you name a track while it is being recorded, be sure to finish
the naming operation before the track ends. If the track ends
before you finish, the entered character data will be discarded
and the track will remain unnamed. Also, you can't name tracks
while the deck is recording over existing material.
35^