Sony MDS-JE630 - Manuel (Page 25)

? You can extend the playing time during music scan
1 While the deck is stopped, press M E N U / N O twice.
"Setup Menu" appears in the display.
2 Turn AMS (or press repeatedly) until "M.Scan"
appears, then press AMS or YES.
3 Turn AMS (or press /►►) repeatedly) to select the playing
time within a range of six to twenty seconds (in one second
steps), then press AMS or YES.
4 Press M E N U / N O .
Playing a track by entering the track
number [X]
Press the number button(s) to enter the track number
of the track you want to play.
To enter a track number over 25
1 Press >25.
2 Enter the corresponding digits.
To enter 0, press 10 instead.
Examples:
• To play track number 30, press >25, then 3 and 10.
• To play track number 108, press >25 twice, then 1,10, and
8
.
9 If you enter a track number while the deck is stopped or
paused
The deck will still be stopped or paused at the beginning of the
track.
Locating a Particular Point
in a Track
You can locate a particular point in a track during play or
play pause.
Locating a point while monitoring the
sound
Press down during play.
You will hear intermittent playback as the disc goes
forward or in reverse. When you reach the point, release
the button.
Notes
• If the disc reaches the end while you're pressing ►►, the deck
stops.
• Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.
Locating a point by observing the time
indication
Press down during play pause.
The elapsed playing time of the track appears in the
display. When you reach the point, release the button.
No sound is output during this time.
9 When Over appears in the display
The disc has reached the end while you're pressing ►►. Turn
AMS counterclockwise (or press ) or press ◄◄ to go back.
2
u
><
s'
tc
S
o
(A
25^