Pioneer X-NM1 - Manuel (Page 7)

7
En
2 Connecting up
English
Connecting a speaker cord to a terminal
1 2 3
Connecting the speakers
Use the supplied speaker cords to connect the speakers to
the amplifier. To get the best sound from the system, it’s
important that you connect the two strands of speaker
cord for each speaker to the correct speaker terminal.
The terminals and cords are color-coded to help you
match them up.
Make sure that the bare speaker wires cannot touch each
other, or come into contact with other metal parts once
the unit is switched on.
To connect a speaker cord to a
terminal
1 Pull off the protective covers on the ends
of each cord, then twist the exposed wire
strands together.
2 Push the tab to open, then insert the
twisted wire fully into the terminal.
Insert the wire with the blue stripe into the red (
ª)
terminal and the other wire into the black (
·)
terminal.
3 Release the tab to secure the speaker
cord.
Tug the wire lightly to make sure it’s secure.