Pioneer X-NM1 - Manuel (Page 36)

36
En
Additional Information 9
Message
NO DISC
Can’t REC
TEMP OVER
MECHA ERROR
CD PLEASE RETRY
TIMER ERROR
Description
CD is not loaded.
The CD data can’t be read.
There is no CD loaded in the CD tray.
The temperature is too high.
The CD player is not functioning properly.
The CD player is not functioning properly.
An attempt is made to set the timer before setting the clock.
Timed recording can’t be set without a recordable tape.
Action
• Load a disc
• Reload the disc
• Load a CD in the CD player
• Turn power off and leave to
cool
• Turn power off then on again
• Press the play (
38) button
• Turn power off then on again
• Unplug/reconnect the power cord
• Set the clock
• Load a recordable tape
Understanding error messages
Protecting your recordings
You can protect an important recording against
accidental erasure by breaking the erase-protect tab(s)
with a small screwdriver.
Erase-protect tab (For side A)
Erase-protect tab (For side B)
If you want to re-record on an erase-protected cassette,
cover the space left by the broken tab with self-adhesive
tape.
Using cassette tapes
The tape of a cassette is quite easily damaged and
loose tape can jam in the tape deck mechanism. If the
tape has become unwound, use a pen or pencil to
wind it back on to the spool.
When not using cassettes, always store in the case.
Store cassettes away from magnetic fields, excessive
heat, humidity, dust or oil.
Before recording on a tape, wind the tape on past the
leader tape (about the first 3 or 4 seconds of each
side).
Tapes you should avoid
Since tapes longer than 90 minutes are so thin, they
are more susceptible to jamming in the tape deck
mechanism and other trouble such as irregular
winding. Avoid using cassette tapes longer than 90
minutes.