Pioneer X-NM1 - Manuel (Page 32)

32
En
Using the timer 8
Using the record timer
You can set the timer to record
something from the tuner at a time
when you may not be around. For
example, you might want to record a
program on the radio that is broadcast
while you're at work. During the actual
recording, the volume is automatically
set to minimum until you change it
again. Once the recording is finished,
the timer is switched off, and has to be
reset if you plan to record another
broadcast while you’re out.
1 Prepare the tape deck for
recording.
• load a tape
• check the recording direction
• set the reverse mode (p. 17)
2 Set up the tuner.
Switch to the tuner, and tune into the
station (see page 15 for more detailed
instructions on this).
3 Press TIMER (SLEEP/TIMER)
repeatedly until you see
WAKE UP/REC (TIMER SET
UP?) then press ENTER.
WAKE UP / REC
TIMER SET UP ?
4 Use
∞ and 5 to select REC
TIMER then press ENTER.
REC. TIMER
STANDBY
/ON SLEEP/
TIMER
7
FM / AM
ENTER
Use the
5 and ∞ buttons to change
the currently displayed option in the
menu. Press
ENTER to select. Press
7
anytime to cancel and exit the menu.
5 Set the recording start time:
First, set the hour:
Use — .
4 and ¢.+ (or ∞
and
5) to change the flashing hour
display, then press ENTER .
ON AM 7:OO
Next, set the minute:
Use — .
4 and ¢.+ (or ∞
and
5) to change the flashing minute
display, then press ENTER .
ON AM 7:3O
6 Set the recording end time:
First, set the hour:
Use — .
4 and ¢.+ (or ∞
and
5) to change the flashing hour
display, then press ENTER .
OFF AM 8:OO
Next, set the minute:
Use — .
4 and ¢.+ (or ∞
and
5) to change the flashing minute
display, then press ENTER .
OFF AM 8:15
After pressing ENTER , the display shows
you the settings you’ve just made,
including the switch on and off times
and the station frequency.