Pioneer X-NM1 - Manuel (Page 15)

15
En
4 Getting Started
English
Listening to the radio
The following steps show you how to
tune in to FM and AM radio broadcasts
using the automatic and manual
tuning functions. Once you are tuned
to a station you can memorize the
frequency for recall later—see More
tuner features on page 21 for how to
do this.
Make sure you have hooked up the AM
and FM antennas. If you haven’t, see
pages 8–9 for how to do it.
1 Press FM/AM to select the
tuner.
Press repeatedly to switch between FM
and AM bands.
FM 87.5OMHz
AM 531kHz
2 Tune to a station.
There are two ways to do this:
• Automatic tuning
To search for stations in the currently
selected band, press and hold either the
∞ or 5 button for about a second. The
system will start searching for the next
station, stopping when it has found
one. Repeat this step to search for other
stations. Press
7 at anytime to stop the
search.
• Manual tuning
To change the frequency one step at a
time, press the
∞/5 buttons.
7
FM / AM
MENU
ENTER ENTER
Improving FM stereo sound
If you’re listening to a stereo FM
broadcast, but find that there is a lot of
noise because of a weak signal, try
switching to mono.
1 Press FM/AM to select the
tuner.
Press repeatedly to switch between FM
and AM bands.
TUNER FM
87.5OMHz
2 Press MENU and use
5 and
∞ to select the AUTO /
MONO display.
AUTO / MONO
Use the
5 and ∞ buttons to change
the currently displayed option in the
menu. Press
ENTER to select. Press
7
anytime to cancel and exit the menu.
3 Use
2 and 3 to switch
between AUTO (stereo) and
MONO reception.
4 Press ENTER to confirm your
selection.
When you choose
MONO , the
STEREO indicator disappears and
MONO lights in the display.