Finding a suitable location, Discs compatible with this system, 1before you start – Pioneer X-NM1 Manuel d'utilisation

Page 5

Advertising
background image

5

En

1

Before you start

English

Discs compatible with this system

Any disc that displays the following logo should play in
this system. Other discs (such as CD-ROMs) will not play
in this unit.

Single sided / Single layer. 12 cm or 8 cm (5" or 3")
discs. Linear PCM digital audio.

Finding a suitable location

We want you to enjoy using your new stereo system for
years to come, so please bear in mind the following
points when choosing a suitable location for the system
components and speakers:

Do...

✔ Use in a well-ventilated room.
✔ Place on a solid, flat, level surface, such as a table,

shelf or stereo rack.

Don’t...

✗ Use in a place exposed to high temperatures or

humidity, including near radiators and other heat-
generating appliances.

✗ Place on a window sill or other place where any of

the components or speakers will be exposed to direct
sunlight.

✗ Use in an excessively dusty or damp environment.
✗ Place directly on top of any appliance which becomes

hot in use.

✗ Use near a television or monitor as you may

experience interference—especially if the television
uses an indoor antenna.

✗ Use in a kitchen or other room where the unit may

be exposed to smoke or steam.

✗ Place on an unstable surface, or one that is not large

enough to support all four of the unit’s feet, or the
whole footprint of each speaker.

✗ Block the cooling vents on the rear and top side of

the unit. Don’t cover the unit with cloth, or use on
thick carpet, etc.

✗ Put objects above or on top of the system or speakers.

Avoiding condensation problems

Condensation may form inside the unit if it is brought
into a warm room from outside, or if the temperature of
the room rises quickly. Although the condensation won’t
damage the unit, it may temporarily impair its
performance. For this reason you should leave it to
adjust to the warmer temperature for about an hour
before switching on and using.

Proper ventilation for the unit

When installing, make sure to leave space around the
unit for ventilation to improve heat radiation (at least
30 cm at top, 30 cm at
rear, and 30 cm at
each side). If there
isn’t enough space
between the unit and
walls or other
equipment, heat will
build up inside,
interfering with
performance or
causing malfunctions.

For this reason, don’t place the unit on a thick carpet,
bed, sofa, or a pile of fabric. Also make sure not to cover
the unit with fabric or any other covering. Anything that
blocks ventilation will cause internal temperature to
rise, which may lead to breakdown or a fire hazard.

• Remotes for different devices can interfere with each

other. Avoid using remotes for other equipment
located nearby this unit.

• Replace the battery when you notice a fall off in the

operating range of the remote.

Advertising