Recording from the tuner or an auxiliary component, 7making tape recordings, Line – Pioneer X-NM1 Manuel d'utilisation

Page 29: Tuner am 522 khz, Reducing the auxiliary input level, Improving am tape recordings

Advertising
background image

29

En

7

Making tape recordings

English

Recording from the tuner or an
auxiliary component

On pages 27 and 28 we covered recording from a CD.
Here's how to record from the tuner or a component
connected via the

LINE

inputs.

1 Prepare for recording.

• load a tape

• check the recording direction

• set the reverse mode (p. 17)

2 Switch to the source you're going to

record.
Press

FM

/

AM

to select FM or AM. To record from the

auxiliary input, press the

LINE

button.

LINE

Recording will be from the auxiliary inputs

3 Prepare the source for recording.

For the tuner, select the radio station broadcast you want
to record (see page 15 if you’re unsure how to do this).
For a line component, switch it on and load the source
material, etc.

4

Press REC MENU and select the recording
mode.
Select

TAPE

REC

from the menu. Once you press

ENTER

, recording starts automatically. Press

7 any

time during the recording to finish the session.

Use the

5 and ∞ buttons to change the currently

displayed option in the menu. Press

ENTER

to select.

Press

7 anytime to cancel and exit the menu.

5 Playback the source (if necessary).

6 When you're done, press

7 on the front

panel to stop recording.

Reducing the auxiliary input level

If the component you connected to the analog inputs
causes the sound to distort, the input level is probably
too high. You can reduce it by turning on the auxiliary
attenuator.

1 Make sure the LINE function is selected.

2 Press MENU.

3 Use

2 and 3 to switch LINE ATT ON or

LINE ATT OFF as required.

4 Press ENTER.

Improving AM tape recordings

Recording AM broadcasts on cassette tape can result in
noisy recordings. If you experience this, turn the beat
cut filter on.

1 Switch the system into standby.

2 Press MENU to select the TUNER BEAT

CUT.

3 Use

2 and 3 to switch the beat cut filter

ON or OFF.

4 Press ENTER.

The system returns to standby. The beat cut indicator
(

7

) will flash in the character display when the beat cut

filter is switched on.

TUNER AM

522 KHz

beat cut indicator

Advertising