About operations in this manual, Before proceeding, Picture/screen adjustment – Pioneer PDA-5003 Manuel d'utilisation

Page 6: Picture adjustment, Part names and functions english

Advertising
background image

3

En

Part Names and Functions

English

Before Proceeding

Before Proceeding

About operations in this manual

Each operation is described in its proper operating order.
These Operating Instructions will refer to the operating
controls found on the remote control unit, with the
exception of those buttons found only on the main
plasma display itself. When the plasma display controls
include equivalent buttons to those found on the remote
control unit, the commands can be performed on the
main unit as well.

The following illustrations are an example of the actual
operations used for the section “PICTURE adjustment”.
The examples are provided to allow you to confirm
whether the operation is performed correctly or not.

Note

The screen images depicted in these Operating Instructions
should be considered typical images; some difference will be
seen in practice, depending on the screen item displayed and its
contents, the input source and various other control settings.

27

En

PICTURE/SCREEN Adjustment

English

PICTURE/SCREEN Adjustment

PICTURE adjustment

MENU

2/3

5/

SET

1

Press the MENU button to display the menu
screen.

MENU

INPUT1

PICTURE

SCREEN

SETUP

OPTION

CONTRAST

BRIGHTNESS
COLOR
TINT
SHARPNESS

PICTURE RESET

ENTER

SET

EXIT

MENU

:

0

:

0

:

0

:

0

:

0

2

Use the

5/ buttons to select the adjustment

item, then press the SET button.

SET

MENU

MENU

INPUT1

SCREEN

SETUP

OPTION

ENTER

EXIT

PICTURE RESET

CONTRAST

BRIGHTNESS

COLOR
TINT
SHARPNESS

:

0

:

0

:

0

:

0

:

0

PICTURE

3

Use the

2/3 buttons to adjust the picture quality

as desired.

:

0

BRIGHTNESS

SET

EXIT

4

Press the SET button.
Pressing the SET button writes the value into the
memory and returns the display to the step 2 screen.

5

When the setup is finished, press the MENU
button to exit the menu screen.

Note
Make these adjustments for each input (INPUT1 to INPUT5) and

signals.

[PICTURE] mode adjustment items
Below are brief descriptions of the options that can be set
in the [PICTURE] mode.

CONTRAST ············· Adjust according to the surrounding

brightness so that the picture can be
seen clearly.

BRIGHTNESS ·········· Adjust so that the dark parts of the

picture can be seen clearly.

COLOR ···················· Adjust to the desired depth (Setting

to a slightly deep color will create a
natural looking picture).

TINT ························· Adjust so that flesh tones look

normal.

SHARPNESS ··········· Normally set to the center position.

To create a softer picture, set to the
left of center. To create a sharper
picture, set to the right of center.

Note
Consult the Operating Instructions for your Plasma Display
regarding PICTURE adjustment when inputting computer signals.

To reset [PICTURE] mode settings to the default

If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the [PICTURE] mode to default
settings instead of trying to make adjustments under
already adjusted conditions.

1

In step 2 in the previous procedure, use the

5/

buttons to select [PICTURE RESET], then press the
SET button.

SET

SET

EXIT

MENU

PICTURE RESET

YES

NO

2

Use the

2/3 buttons to select [YES], and press

the SET button.
All [PICTURE] mode settings are returned to the
factory set default.

Display operating
panel

Remote control unit

MENU

5/

SET

2/3

Advertising
Ce manuel est liée aux produits suivants: