Pioneer PDA-5003 - Manuel (Page 37)

34
En
Other Operations
English
3 Press the 5/∞ buttons to select [ENERGY SAVE].
SET MENU
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
: ORBITER OFF
: MASK CONTROL ON
: AUTO SET UP MODE INACTIVE
: AUTO FUNCTION OFF
: AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
CHANGE EXIT
PICTURE SCREEN SETUP OPTION
4 Press the SET button to select [ENERGY SAVE]
setting.
The factory default setting is [STANDARD].
Each time the SET button is pressed, the setting
changes as follows:
÷ STANDARD ... Brightness is controlled in
accordance with input signal to
produce bright, easily viewed image.
÷ MODE1 ......... Brightness is controlled in
accordance with input signal, but
power consumption is less than that
used in [STANDARD] mode.
÷ MODE2 ......... Brightness is controlled in accordance
with input signal, but power
consumption is less than that used in
[MODE1].
÷ MODE3 ......... Brightness is set at fixed level,
regardless of input signal level.
Effective at reducing screen aging
due to burned lag images, etc.
÷ AUTO ............ Brightness is set automatically in
response to ambient lighting
conditions so as to produce optimum
image appearance.
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
The [ENERGY SAVE] setting affects all input sources.
3 STANDARD
MODE2 2 MODE1 2
3 AUTO
MODE3 2
Changing the color temperature
(COLOR TEMP.)
MENU
2/3
5/∞
SET
1 Press the MENU button to display the menu
screen.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
ENTER SET EXIT MENU
: 0
: 0
: 0
: 0
: 0
2
Use the 2/3 buttons to select [SETUP].
:
:
:
DNR
COLOR TEMP.
:
MIDDLE
MIDDLE
: MPEG NR LOW
: CTI ON
: PURECINEMA OFF
:
:
:
SIGNAL FORMAT
COLOR DECODING RGB
VGA
:
CLAMP POSITION AUTO
AUTO POWER OFF DISABLE
SET MENU
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CHANGE EXIT
MENU
5/∞
SET
2/3
Display operating panel Remote control unit
Other Operations