Pioneer PDA-5003 - Manuel (Page 39)

36
En
Other Operations
English
Reducing noise in MPEG images
(MPEG NR)
Set this function if digital broadcasts, DVD and other
MPEG images are distorted with so-called “mosquito
noise”.
MENU
2/3
5/∞
SET
MENU
5/∞
SET
2/3
Display operating panel Remote control unit
4 Use the 2/3 buttons to select the desired [DNR]
setting.
SET SET EXIT MENU
MIDDLE : D N R
The factory default setting is [MIDDLE]. Each time the
button is pressed, the digital noise reduction setting
changes as shown:
÷ The noise reduction effect increases in order LOW
= MIDDLE = HIGH
5 Press the SET buttton.
The [DNR] function is set and the screen returns to
that shown in step 4.
6 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
[DNR] settings are supported only for input signal from a video
component. Make settings individually for each input (INPUT1,
INPUT3 to INPUT5), and for each signal type.
3 OFF 2
3 HIGH 2 3 MIDDLE 2 3 LOW 2
1 Press the MENU button to display the menu screen.
MENU INPUT3
SCREEN SETUP OPTION
ENTER SET EXIT MENU
PICTURE RESET
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS : 0
: 0
: 0
: 0
: 0
PICTURE
2 Use the 2/3 buttons to select [SETUP].
SET MENU
:
:
DNR
COLOR TEMP.
:
MIDDLE
MIDDLE
:
:
COLOR SYSTEM
PURECINEMA OFF
AUTO
:
:
CTI ON
MPEG NR LOW
AUTO POWER OFF DISABLE
MENU INPUT3
PICTURE SCREEN SETUP OPTION
CHANGE EXIT
3 Use the 5/∞ buttons to select [MPEG NR], then
press the SET button.
MENU INPUT3
PICTURE SCREEN SETUP OPTION
:
:
DNR
COLOR TEMP.
:
MIDDLE
MIDDLE
:
:
COLOR SYSTEM
PURECINEMA OFF
AUTO
:
: CTI ON
MPEG NR LOW
AUTO POWER OFF DISABLE
4 Use the 2/3 buttons to select the desired [MPEG
NR] setting.
SET SET EXIT MENU
LOW : M P E G N R
The factory default setting is [LOW]. Each time the button
is pressed, the noise reduction setting changes as shown:
÷ The noise reduction effect increases in order LOW
= MIDDLE = HIGH
5 Press the SET button.
The [MPEG NR] function is set and the screen returns
to that shown in step 4.
6 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
[MPEG NR] settings are supported only for input signal from a
video component. Make settings individually for each input
(INPUT1, INPUT3 to INPUT5), and for each signal type.
3 OFF 2
3 HIGH 2 3 MIDDLE 2 3 LOW 2
Other Operations