Lifescan SPD2410BD - Manuel (Page 79)

QUICK REFERENCE
70
C O D I N G T H E M E T E R
Before testing, make sure the meter is coded correctly.
2 The meter automatical-
ly displays the last test
result with the date. . .
1
Press blue power button
to turn on meter. Make
sure a test strip is not in the
meter when you turn it on.
3
. . . and then the code
number is displayed
afterward.
4
Compare the code
number on the meter to
the code number on the test
strip vial. If the code num-
bers do not match, press
the green
C button until the
code number on the meter
matches the code number
on the test strip vial.
P E R F O R M I N G A T E S T
4 Firmly push the test
strip into the test strip
holder, with the tapered-end
first and the confirmation
dot facing down, until it
stops. Read result. Do not
remove strip until count-
down is complete.
3 Check confirmation dot
on back of test strip and
make sure it is completely
blue.
2 Apply blood to the
centre of the pink test
square. Never add a second
drop of blood.
1 Press blue power button
to turn on meter. Make
sure a test strip is not in the
meter when you turn it on.
→
Green C Button
(Example)
(Example)
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 70