Lifescan SPD2410BD - Manuel (Page 52)

43
MAINTENANCE
3. Dampen a cotton swab or soft cloth with
water and wipe the lens area and contact
points with it. Do not scratch the lens
area. Dry with a soft cloth or tissue that
does not contain lint, lotion, or per-
fume. Do not use abrasive materials
such as paper towels. 4. Slide the test strip holder into the meter,
press down, and push forward at the test
strip insertion point until you hear a click.
Make sure the test strip holder is firmly
in place and does not extend beyond
the meter.
5. Turn on the meter by pressing the blue
power button. The display check
appears briefly. Carefully check that
all symbols appear.
Contact Points
Lens Area
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 43