Lifescan SPD2410BD - Manuel (Page 51)

2. Wipe the test strip holder gently with a
cotton swab or soft cloth dampened with
water. Thoroughly wipe the grey area on
the inside cover. Clean both sides of the
test strip holder base, especially around
the hole. Dry the test strip holder com-
pletely with a soft cloth or lint–free
tissue.
MAINTENANCE 42
1. Press down at the top end (near blue
power button) of the test strip holder and
slide it away from the meter.
Always clean the meter
when this symbol
appears.
Cover Top of
Base Bottom
of Base
Inside Cover Grey Area Hole (clean both sides)
Base
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 42