Lifescan SPD2410BD - Manuel (Page 68)

59
SETTINGS
Entering Set–Up Mode
1. Turn off the meter.
2. Press and hold down the green C button.
3. Press and release the blue power button
while holding down the green
C button.
4. Release the green C button.
5. Each setting flashes on the display until
you press the blue power button to move
to the next feature.
6. You can change the setting while it flash-
es by pressing the green
C button.
NOTE: To move quickly through the
features, press the blue button repeated-
ly or press and hold it down to
scroll.
Setting the Date and Time
The OneTouch ® SureStep ® Meter records the
time and date of each glucose test you per-
form. You may have to change the time and
date, for example, when the batteries are
changed. You will also need to reset the
time when daylight savings time starts or
ends. The accuracy of your glucose results is
not affected if the date and time settings are
incorrect.
When setting the date and time, if you pass
the desired number (for example, day, month
year), continue pressing the green
C button
to cycle through the values and back to the
desired number.
Green C Button
Blue Power
Button
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 59