JVC D-ILA DLA-QX1G - Manuel (Page 47)

45
ENGLISH
Contents of the Menu (Cont.)
The values in the [ ] are initial settings.
■ VIC menu (VIC menu 1/2)
In this menu, the setting of the installed VIC can be adjusted.
When RGB VIC is selected as the current input terminal, “VIC
menu” is available. When HDTV/HD-SDI VIC is selected as
the current input terminal, “VIC menu1” and “VIC menu 2” are
available.
For RGB VIC
Tracking : Adjusts the lateral size and display area of
video image within the range of 0 to 4095.
Phase : Adjusts flickering or dim video image within
the range of 0 to 15.
AD sync adj. : Adjusts the outline of the text on the screen or
reduces the noise. To get the best picture,
select a value from the range of 0 to 255. [0]
Offset & Gain : Adjusts the offset and gain of the input signal
for each RGB.
Press the ENTER button to go to the next sub
menu. See “Offset & Gain menu” on page 47.
Clamp : Sets the clamp pulse’s position at the back
porch (BP) or on the sync tip (ST). Normally,
the clamp pulse is used at ST. If, with some
PCs or workstations, the screen becomes
unstable such as being too dark or too bright,
try to switch to BP.
[ST]
3
Tracking
Phase
AD sync adj.
Offset & Gain
Clamp 1020
12
VIC menu
BP ST
ENTER
123
For HDTV/HD-SDI VIC
• To alternate between the VIC menu 1 and the VIC menu 2,
press the ENTER button while the other menu is selected.
Tint : Adjusts the tint of the video image being
projected within the range of –30 to 30.
Normally select 0.
[0]
Color : Adjusts the color density of the video image
being projected within the range of –30 to 30.
Normally select 0.
[0]
Sharpness : Adjusts the sharpness of the video image
being projected within the range of –15 to 15.
Normally select 0.
[0]
Phase : Adjusts flickering or dim video image within
the range of 0 to 15.
HDTV : Selects proper format to project the video
image of the HD signal with accurate 16:9
aspect ratio.
[1080i]
1080i : Normally select this.
1035i : Select this when the video image is
not stable.
MAIP : Detects the degree of moving in the video
image and gets the best performance to project
the moving pictures.
[ON]
ON : For the video image with a lot of moving
pictures.
OFF : For the video image with a lot of still
pictures.
2-2/2-3 Pulldown : Automatically adjusts the video image from
the film with quick action to be projected
properly.
[AUTO]
OFF : Not to use this function.
AUTO : Normally select this.
3
Tint
Color
Sharpness
Phase
VIC menu 2
VIC menu 1
ENTER
123
123
123
123
HDTV
MAIP
2-2/2-3 Pulldown
VIC menu 1
VIC menu 2
ENTER
Auto OFF
ON OFF
1035i 1080i
Menu Operations (Cont.)
(To be continued on the next page)
EN39-47QX1G_f.pm6 02.3.7, 13:38 45