Connector panel, 12 controls and features (cont.) – JVC D-ILA DLA-QX1G Manuel d'utilisation

Page 14

Advertising
background image

12

Controls and Features (cont.)

Connector Panel

1

REMOTE terminal (mini jack)
This terminal is used to directly connect the remote con-
trol unit to the projector. Use the remote control cable sup-
plied.

2

RS-232C OUT terminal (D-sub 9 pin)
This is an RS-232C interface-specified terminal. When
another DLA-QX1G is connected to this projector using
this terminal, you can enable a computer to control plural
DLA-QX1Gs at the same time.
For details, consult your dealer.

3

RS-232C IN terminal (D-sub 9 pin)
This is a RS-232C interface-specified terminal. This
projector can be controlled by a computer connected
externally.
For details, consult your dealer.

4

LED
This LED lights up when the RGB Analog VIC is selected.

REMOTE

CONTROL

RS-232C OUT

RS-232C IN

2

1

3

B

G

R

V

H/C

S

RGB Analog VIC

4

5

6

5

RGB IN terminals (BNC x 5)
These are multipurpose video input terminals that allow
input of the following signals.
• Analog RGB signals, vertical sync (V) signals, and

horizontal sync (H) signals / composite signals (Cs).
(Devices which have analog RGB signal output terminals
can be connected.)

* Input of external sync signals is automatically detected.

Detection of H/V signals or Cs signals causes automatic
switching to external sync. The priority order is H/V >
Cs.

• The uppermost edge of the image may appear to bow if

the sync signal input is composite sync (Cs) or G on sync
signal. In this case, use separate sync signals for vertical
sync (V) and horizontal sync (H).

6

VIC slots (x 2)
You can install the optional VICs in this projector using
these slots. The following VICs are available.
HDTV Analog VIC

This VIC enables the projector to be input the conventional
HDTV signal (Y, P

b

, and P

r

).

HD-SDI VIC

This VIC enables the projector to be input and output the
HD-SDI signal. The output terminal can be used as a line
through terminal for checking the input signal by
connecting the HD-SDI monitor or for using plural
projectors at the same time.

For details, refer to page 13.

EN07-16QX1G_f.pm6

02.3.7, 13:37

12

Advertising