Sony MDS-JB930 - Manuel (Page 52)

o
■o
(D
3
ta
I*
T
IS
S
o
o
IS ft
7T
c
VI
5'
u
ID
<<
IT
0
ai
Assigning Characters to
Keyboard Keys
Assigning a character
If your keyboard layout doesn't match the system
settings, the displa\- may shov\' the wrong characters or no
characters at all when you press the keys. In this case,
you need to assign characters to the keys.
1 While the deck is stopped, press [Esc] twice.
"Setup Menu" appears in the display.
2 Press [f]/[|] or [Tab]/[Shift]+[Tab] repeatedly until
"Keyboard ?" appears, then press [Enter].
3 Press [t]/[il or [Tab]/[Shift]+[Tab] repeatedly until
"Assign ?" appears, then press [Enter].
4 Press [|]/[|] or [Tab]/[Shift]+[Tab] repeatedly until
the character you want to assign appears.
If the character has already been assigned, "User"
appears. If it has not been assigned, "Default"
appears.
5 Press [Enter].
"<Set Key>" flashes in the display.
6 Press the key to be assigned to on the keyboard.
"Key Change" appears, and the selected character is
assigned to the key.
If "Same Key" appears
The same character is already assigned to the key.
If "Remove old assign?" appears
A different character is already assigned to the key.
Press [Enter] to clear the current assignment and
assign the new character. Press [Esc] to cancel.
Notes
• You can assign a character with [Shift] only for symbol and
number keys.
• You can't assign a character to the following keys:
[Esc], [FI ] - [F12], [Back Space], [Tab], [Caps Lock], [Enter],
]Shift], [Ctrl], ]Alt], [Windows], ]Space], ]Application], [Print
Screen], ]Scroll Lock], ]Pause], ]Insert], [Delete], [Home], [End],
[Page Up], [Page Down], [Num Lock], [*—], [—►], ]|], [|], and
[/]- [*]/ [-]/ l+l (of the ten-keys)
• "Key Change" doesn't appear in step 6 if you try to assign a
character to one of the keys listed above or other ke\ s for
which input is not accepted.
Clearing key assignments
You can clear ke\' assignments one at a time or all at once.
To clear a key assignment
1
Do steps 1 to 3 of "Assigning a character" on this
page.
2
Press [|]/[|] or [Tab]/[Shift]+[Tab] repeatedly until
the character you want to clear appears (only
characters for which "User" is indicated), then
press [Enter].
"<Set Kev>" flashes in the display.
3
Press [Delete].
"Key Clear" appears and the key assignment is
cleared.
To dear all key assignments
1
Do steps 1 to 3 of "Assigning a character" on this
page.
2
Press [Ctrl], [Alt], and [Delete] simultaneously.
"All Reset ?" apopears in the display.
3
Press [Enter].
"Complete!!" appears, and all assignments are cleared.
To cancel the operation
Press ]Esc].
5 2 ^