Sony MDS-JB930 - Manuel (Page 27)

Playing a Specific Track
Wliile the deck is playing or stopped, use the procedure
below to quickly play any track.
Number
buttons
AMS
Locating a track with AMS’'
To go to Do the following:
The next or a succeeding track
during play Turn AMS clockwise (or press
►►1 repeatedly).
A preceding track during play Turn AMS counterclockwise (or
press repeatedly).
The beginning of the current
track during play Turn AMS counterclockwise (or
press once).
A specific track while the deck
is stopped Turn AMS (or press /►>!
repeatedly) until the track
number you want to go to flashes
in the display, then press AMS or
[>.
A specific track by scanning
each track for six to twenty
seconds (Music Scan) X Press M.SCAN to start scanning.
When you find the track you
want, press t> to start playing.
* Automatic Music Sensor
To locate the last track of the MD quickly
While the deck is stopped, turn AMS counterclockwise (or press
once).
i If you locate a track while the deck is stopped or paused
The deck will still be stopped or paused at the beginning of the
located track.
Q You can change the duration of Music Scan
1 While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2 Turn AMS (or press •◄◄/►►I repeatedly) until "M.Scan"
appears, then press AMS or YES.
3 Turn AMS (or press /►►! repeatedly) to select the
duration, then press AMS or YES. You can set the duration
within a range of six to twenty seconds, in one step.
4 Press MENU/NO.
Playing a track by entering the track
number
[T]
Press the number button(s) to enter the track number
of the track you want to play.
To enter a track number over 25
1 Press >25.
2 Enter the corresponding digits.
To enter 0, press 10 instead.
Examples;
• To play track number 30, press >25, then 3 and 10.
• To play track number 108, press >25 twice, then 1,10, and
8 .
i If you enter a track number while the deck is stopped or
paused
The deck will still be stopped or paused at the beginning of the
track.
2
S7
<.
5'
(Q
s
o
V)
27'-