About indication which appears while editing, When "protected" appears in the display, About indications which appear after editing – Sony MDS-JB930 Manuel d'utilisation
Page 34: When "toc" lights up in the display, When "toc writing" flashes in the display, Erasing tracks, Erasing a track, Example: erasing the second track, Tjaaa |[2] bbb [j]ccc, T] aaa
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
m
a
3
(fi
3
9
n
O
s.
ID
a
S
o
VI
About indication which appears while
editing
When "Protected" appears in the display
The record-protect slot is open. To edit the MD, slide the
tab to close the slot. For details, see “To prevent
accidental erasure of the recorded material" on page 19.
About indications which appear after
editing
When "TOC" lights up in the display
Editing has finished but the TOC (Table of Contents) on
the MD has not been updated to reflect the editing results.
The editing will be lost if you disconnect the AC power
cord while the indication is on. The TOC will be updated
only when you eject the MD or turn off the MD deck.
When "TOC Writing" flashes in the display
The deck is updating the TOC. Do not disconnect the AC
power cord or move the deck while the indication flashes.
Erasing Tracks
You can erase a track or part of a track simply by
specifying the number of the track or the portion within a
track to be erased. You can also erase all the tracks on an
MD at one time.
Erasing a track
Specify the number of the track you want to erase.
Example: Erasing the second track
[TJAAA |[2] BBB [J]CCC-
[T] AAA
i £ ,
[3]DDD
[4]DDD
When you erase a track, all the tracks after the one erased
are automatically renumbered. For example, if you erase
track number 2, the previous track number 3 becomes
track number 2 and the previous track number 4 becomes
track number 3, and so on.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
“Edit Menu" appears in the display.
Turn AMS (or press /►►! repeatedly) until "Tr
Erase ?" appears, then press AMS or YES.
The deck starts to play the track indicated by the
number in the display.
3 Turn AMS (or press l◄◄/►►l repeatedly) until the
track number you want to erase appears.
4
Press AMS or YES.
“Complete!!" appears for a few seconds and the track
is erased. The track following the erased track starts
to play. If the erased track is the last one on the MD,
the track preceding the erased track starts to play.
To cancel the operation
Press MENU/NO o r « .
34''