Sony MDS-JB930 - Manuel (Page 50)

o
■o
ID
3
(0
ID
s
o
o
ID
n
7T
c
U)
5'
«Q
ID
><
IT
0
b
Naming a Track or MD
Using the Keyboard
It vou uso a koN'board, voii can quickly enter or edit
names. While editing a name, vou can mo\’e the cursor in
jumps or scroll the name.
Short cut to the naming procedure
1 Press [Num Lock] while the deck is in one of the
operating statuses listed below, depending on
what you want to name:
To name Press while the deck is
A track Playing, paused, recording, or stopped
with the track number displayed
The MD Stopped with no track number displayed
A flashing cursor appears in the display.
2 Enter a name.
Besides letter keys, you can also use the keys shown in
the following table.
3 Press [Enter] or [Num Lock].
The whole name appears in the display
Operations you may want to do while naming a
track or MD
To Press
Cancel the operation [Esc]
Switch between uppercase and
lowercase letters [Caps Lock] or [Shift]*
Move the cursor [^] or [—]
Jump the cursor to the top of the name [Home]
Jump the cursor to the end of the name [End]
Scroll the name [Page Up] or
[Page Down]
Erase the character at the cursor
position [Delete]
Erase the character preceding the
cursor [Back Space]
<■ If you have assi;^ned characters to keys iisiu^ I Shift I (see page o2),
the characters you assigned have priority.
You can undo the naming of a track or MD
1 Press [Fit ].
"Name Undo?" appears.
2 Press [Enter].
Press [Esc] to cancel the operation.
Using the Edit Menu
1 Press [Esc] while the deck is in one of the operating
statuses listed below, depending on what you
want to name:
To name Press while the deck is
A track or the MD Stopped, playing, or paused
The track being recorded Recording the track
3
4
5
6
"Edit Menu" appears in the display.
Press [t]/[|] or [Tab]/[Shift]+[Tab] repeatedly until
"Name ?" appears, then press [Enter].
While the deck is recording, a flashing cursor appears
in the display and you can enter a name for the track
being recorded. In this case, go to step 5.
Press [|]/[|] or [Tab]/[Shift]+[Tab] repeatedly until
"Nm In ?" appears, then press [Enter].
Press [f]/[|,] or [Tab]/[Shift]+[Tab] repeatedly until
the track number (when naming a track) or "Disc"
(when naming the MD) flashes, then press [Enter].
A flashing cursor appears.
Enter a name.
Press [Enter] or [Num Lock].
The whole name appears in the display.
5 0 ^