Breville BES800XL - Manuel (Page 20)

19
OPERATING yOUR BREvILLE dUO-TEMP™ ESPRESSO MACHINE
WARNING
The metal parts of the filter holder
might still be very hot. Cool these parts
in cold water.
NOTE
When the BES800XL is creating
steam a pulsing noise can be heard.
This is the normal operation of the 15
Bar pump.
• When the red ‘Heating’ light stops
flashing, quickly insert the Steam
Wand into the jug of milk so that the
Froth Attachment is just immersed
into the milk.
NOTE
If steam starts coming from the
Steam Wand before it is immersed in
the milk, pause the steam by turning
the Selector Control back to the
‘Standby’ position. This will avoid the
steam pressure blowing milk out of
the jug. A pumping noise will sound
for a short time.
• Hold the frothing jug at an angle so that
the Frothing Attachment sits just below
the surface of the heating milk and the
steam will move the milk around the
inside of the jug in a circular motion.
NOTE
The BES800XL features a Swivel
Steam Wand assembly so the position
of the Steam Wand can be changed to
a comfortable angle.
• When the milk starts to increase
in volume, immerse the Frothing
Attachment deeper into the jug to heat
the milk.
• Hold the jug at an angle with one hand
and place your other hand on the outer
base of the stainless frothing jug.
• When the base of the jug becomes too
hot to touch, set the Selector Control
to the ‘Standby’ position, stopping the
steaming function before removing the
jug. A pumping noise will sound for a
short time.
• Pour the steamed milk into each cup
of freshly brewed espresso coffee
and spoon in the frothed milk, in
the following ratios: Cappuccino - L
espresso, L steamed milk, L frothed
milk Latté - L espresso topped with
steamed milk and about ¼ inch (1cm)
of frothed milk (traditionally served in
a glass).