Breville BES800XL - Manuel (Page 18)

17
OPERATING yOUR BREvILLE dUO-TEMP™ ESPRESSO MACHINE
NOTE
The machine remains ready for
brewing and maintains a constant
heating temperature while the
Power On/off button is in the ‘On’
position. If the temperature lowers,
the heating light will illuminate and
the Thermoblock Heating System will
automatically reheat to the correct
brewing temperature.
STEP 6 - INSERTING THE
fILTER HOLdER
• Place the Filter Holder underneath the
Brew Head so that the handle is aligned
with the insert graphic. Insert the Filter
Holder up into the Brew Head and rotate
the handle to the right until resistance
is felt, this will be at an approximate 90°
angle to the machine.
STEP 7 - BREWING THE COffEE
• The red ‘Heating’ light cycles off when
the machine has reached the correct
temperature for brewing.
• Ensure the Drip Tray and Grid are
in place.
• Place one or two pre-warmed cups
beneath the Filter Holder outlet.
• Set the Selector Control to the
‘Espresso’ position.
• After a few seconds, aromatic coffee will
begin to brew into the cups. A pumping
noise will be heard in this operation.
• When sufficient coffee has flowed into
the cups, set the Selector Control to the
‘Standby’ position. This will stop the
flow of coffee.
• If the steam function is not required,
leave the Selector Control to the
‘Standby’ position, unplug the power
cord and allow the machine to cool.
PRE-BREW fUNCTION
• When the Selector Control is set to the
‘Espresso’ position, the 15 bar pump
pumps water momentarily, followed by a
pause, then continues to pump the water
through to the ground coffee in the Filter
Holder. This prebrew function is an
advanced feature of the BES800XL.
• The ground coffee is moistened by
a small amount of water before full
extraction. The ground coffee expands
and when greater pressure is built up,
the brewed coffee is extracted with its
full flavor.