Sony TA-VA80ES - Manuel (Page 13)

Getting Started Basic Operations
13 EN
*
Sony VCRs are operated with a VTR 1, 2, or 3 setting
that corresponds to Beta, 8mm, and VHS,
respectively.
Note
Pressing a SYSTEM CONTROL/FUNCTION button
will activate the component indicated for that button
(i.e., the component connected to the respective
connector). If, however, the connected component is
different from the one indicated for the button, the
component will not be activated when the button is
pressed only once.
For example, to watch Sony LD player connected to the
VIDEO 2 jacks (page 8):
Press VIDEO 2 to switch the function, then press LD to
set the remote control to operate the LD player.
If you want to change the factory setting of a
button
See page 23.
If the component does not turn on
Press the power switch on the component.
2
Start playing.
See “Remote Button Descriptions” on page 30 for
details.
To turn off the components
Press SYSTEM OFF. This will also turn off the video/
audio component connected to AC OUTLET on the
back of this unit at the same time.
z If you use a Sony TV
When you press TV to watch a TV program, the TV
turns on and switches to the TV input. The TV also
turns on automatically and switches to the appropriate
video input when you press VIDEO 1 or VIDEO 2. If the
TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
z
Watching TV without the amplifier (for Sony TVs
only)
Press TV CONTROL ON to set the remote to operate TV
functions only. When you press this button, the TV
turns on and switches to the TV input. If the TV does
not automatically switch to the TV input, press TV/
VIDEO.
Making components selectable/
unselectable
You can do these settings so that certain components
become unselectable even if you rotate FUNCTION.
1
Press SET UP repeatedly to select FUNCTION
HOOKUP.
2
Use the digital processing control buttons ( V / v )
to select a component.
3
Use the digital processing control buttons ( B /
b ) to select CONNECT (selectable) or NO
(unselectable).
Note
If you try to select the component which is set to NO using
the remote, “NO CONNECTION” appears in the display.