Sony DSR-40/40P - Manuel (Page 53)

Chapter 3 Menu Settings
Chapter 5 Menu Settings
53 GB
a) The z mark appears on the monitor screen when the value is set to “0.”
b) Adjust the value with the
J/j buttons.
Menu options
NEXT MODE FROM STILL
H PHASE COARSE a)
H PHASE FINE a)
SC 0/180 a)
SC PHASE a)
PB COMPONENT Y LEVEL a)
PB COMPONENT B–Y LEVEL a)
PB COMPONENT R–Y LEVEL a)
COMPOSITE B–Y GAIN a)
COMPOSITE R–Y GAIN a)
AUDIO MIX BALANCE
AUDIO MODE
JOG WITH SOUND
HOURS METER
CLOCK SET
Set this option to
STEP FWD
STB OFF
—
—
0DEG
180DEG
—
—
—
—
—
—
—
Fs48k
Fs32k
ON
OFF
DRUM
ROTATION
THREADING
—
Description of settings
• To advance the tape one frame after elapsing the set time of STILL
TIMER during still mode.
• To turn the unit to standby-off mode from still mode after elapsing the
set time of STILL TIMER.
For rough adjustment of sync phase. b)
For fine adjustment of sync phase. b)
For rough adjustment of subcarrier phase. b)
For fine adjustment of subcarrier phase. b)
Adjusts Y signal level of the component signal in the playback mode. b)
Adjusts B–Y signal level of the component signal in the playback mode. b)
Adjusts R–Y signal level of the component signal in the playback mode. b)
Adjusts B–Y signal gain level of the composite signal in the playback mode. b)
Adjusts R–Y signal gain level of the composite signal in the playback mode. b)
If you set the AUDIO MONITOR selector to MIX, you can select the
precise balance between channels 1/2 and channels 3/4 by five steps.
• To set the audio mode to 2-channel mode (16bit mode). This mode
uses the whole audio area to record one stereo track. You can get
higher sound quality.
• To set the audio mode to 4-channel mode (12bit mode). This mode
separates the audio area into 2 parts. You can record two kinds of
audio, stereo 1 and stereo 2. When recording on this VCR, audio
signals are recorded only in channels 1/2.
• To listen to the sound when playing a tape at various speeds.
• To turn off the sound when playing a tape at various speeds.
The digital hours meter keeps cumulative counts of the head drum
rotation time and the number of unthreading operations. These counts
can be displayed on the monitor screen and are unresettable.
• The cumulative total hours of drum rotation with tape threaded is
displayed in 10-hour increments.
• The cumulative number of tape unthreading operation is displayed in
10-operation increments.
Set the clock on this VCR so that the recording time can be written into
the index signal.
Using
˘ / ≥ and SET buttons, set the date and time.