Sony DSR-40/40P - Manuel (Page 24)

Recording
Chapter 2 Playback and Recording
24 GB
Chapter 2 Recording and Playback
To video equipment without the DV jack
Notes
• When recording the analog input signals, this VCR can digitally output
the signals from the DV jack for backup. Set DV EE OUT in the menu to
ON (see page 52).
• When you connect output jacks of this VCR to input jacks of the player,
select the input correctly to prevent a humming noise.
• Distorted signals (e.g., when played back at a speed other than normal)
will not be recorded properly.
• The indications (Time code, alarm messages, and menu, etc.) displayed
on the monitor screen are output only via the MONITOR connector.
Monitor
This VCR (Recorder) Player
75 Ω coaxial cable (not supplied)
S-video cable (not supplied)
Audio cable (not supplied)
l : Signal flow
to the S-video output
jack
to the video output jack
to the audio
output jacks
INPUT OUTPUT REF.VIDEO INPUT
MONITOR
CH-1
CH-2
CH-1/3
VIDEO
Y
AUDIO CH-1/3 AUDIO CH-2/4
R-Y B-Y
CH-2/4
AUDIO
VIDEO
S VIDEO
INPUT OUTPUT REF.VIDEO INPUT
MONITOR
CH-1
CH-2
CH-1/3
VIDEO
Y
AUDIO CH-1/3 AUDIO CH-2/4
R-Y B-Y
CH-2/4
AUDIO
VIDEO
S VIDEO