Sony DSR-40/40P - Manuel (Page 49)

Chapter 4 Using the Unit as a Recorder in an Editing System
Chapter 4 Using the Unit as a Recorder in an Editing System
49 GB
DUP
INPUT SELECT TC
TAPE REMAIN COUNTER
COUNTER SELECT CH-1/2
CH-3/4 MIX
AUDIO MONITOR REPEAT
REC OFF
TIMER REMOTE
LOCAL MENU
SET
DSR-200A/200AP
DSR-40/40P
RS-422
LANC RS-422
PGM
video
output
PGM audio output
RS-422
Ref. input
B.B. output RS-422 RS-422
IF-FXE2
FXE-100/100P
+
FXE-KIT1
Audio output Video output
Audio output Video output
Audio input
Video input
Video input
Video input Audio input
Audio input
Using the Unit as a Recorder with FXE-100/100P/120/120P
This unit can be used as a recorder with the FXE-100/100P/120/120P.
However, editing accuracy will not correspond with the RS-422A standard
in the editing system.
For details on usage and connections, refer to the operating manuals
supplied with your devices used in a system.
Notes
When using this unit as a recorder:
• You cannot execute video/audio insert editing.
• When you use the unit as a recorder with the FXE-120/120P, only
assemble editing is available.
• Adjust the edit timing (See page 40).
• Set RECORDER MODE to FXE RECORDER.
• When you use the unit as a recorder with the FXE-100/100P, the FXE-
KIT1 is required for upgrading the FXE-100/100P.
• Editing accuracy is not guaranteed. If the duration is very short, the
recording may not function properly.
• Be sure to execute the LEARN function. If you do not use the unit for a
long time, you have to execute the function also.
• If you execute REC command via RS-422A, it delays the recording start
time for about five minutes.
• Set RECORDER to OTHERS in the SETUP menu item 102 (112: when
using the FXE-100/100P that has been upgraded with the FXE-KIT1)
REMOTE INTERFACE of the FXE-120/120P.
When using this unit as a recorder with the FXE-100/100P (that
has been upgraded with the FXE-KIT1)
Ref.
Input
Player
Audio/Video
output
Audio/video input
Chapter 4 Using the Unit as a Recor
der in an Editing System
RS-422