Sony DSR-40/40P - Manuel (Page 23)

Chapter 2 Playback and Recording
Chapter 2 Recording and Playback
23 GB
This section describes the necessary connections, settings and operations
to perform recording on this unit. The same settings and operations apply
whether you are using the unit as part of an editing system, for dubbing, or
as a stand-alone recorder.
Connections for Recording
To digital video equipment with the DV jack
The video and audio signals are sent with hardly any degradation, enabling
high-quality recording. The signal flow is automatically detected so you
need not make separate connections for input and output.
Notes
• With the DV connection, the sound is recorded in the same audio
recording mode as that of the source tape. To record in a different audio
recording mode from the source tape, use the INPUT connectors instead.
• With the DV connection, tape information (recording date, camcorder
data, etc.) recorded on the source tape is transmitted from the other VCR
(player). As a result, when you play back a recorded tape and press the
DATA CODE button on the optional DSRM-20 remote control unit, the
same tape information recorded on the source tape is displayed on the
monitor screen. However, contents of the cassette memory are not
transmitted. In addition, the time code is newly recorded on the tape on
this VCR, except when copying a tape in Duplication mode.
Player
This VCR (Recorder)
Monitor
i.LINK cable (DV connecting cable)
(not supplied)
to the DV
jack
Recording
IN/OUT
DV
l : Signal flow