Sony DSR-40/40P - Manuel (Page 17)

Chapter 2 Playback and Recording
Chapter 2 Playback and Recording
17 GB
To video equipment without the DV jack
Notes
• When you connect output jacks of the recorder to input jacks of this
VCR, select the input correctly to prevent a humming noise.
• Distorted signals (e.g., when played back at a speed other than normal)
will not be recorded properly.
• The indications (Time code, alarm messages, and menu, etc.) displayed
on the monitor screen are output only via the MONITOR connector.
• If the DV input is selected, you cannot perform the playback
synchronized with the video reference (black burst) signal.
Chapter 2 Pla
ybac
k and Recor
ding
Monitor
This VCR (Player) Recorder
75 Ω coaxial cable (not supplied)
S-video cable (not supplied)
XLR cable (not supplied)
Video cable (3BNC y 3BNC) (not supplied)
to the S-video
input jack
to the video
input jack
to the audio
input jacks
INPUT OUTPUT REF.VIDEO INPUT
MONITOR
CH-1
CH-2
CH-1/3
VIDEO
Y
AUDIO CH-1/3 AUDIO CH-2/4
R-Y B-Y
CH-2/4
AUDIO
VIDEO
S VIDEO
INPUT OUTPUT REF.VIDEO INPUT
MONITOR
CH-1
CH-2
CH-1/3
VIDEO
Y
AUDIO CH-1/3 AUDIO CH-2/4
R-Y B-Y
CH-2/4
AUDIO
VIDEO
S VIDEO
L : Signal flow
to the video
input jacks