Selecting subtitles, Lip sync, Display dimming – Esoteric D00816600A Manuel d'utilisation

Page 25

Advertising
background image

25

ENGLISH

Selecting subtitles

DVD

Use the SUBTITLE button to select DVD subtitles.
Repeated presses of this button cycle through available
languages on a disc until OFF is reached (no subtitle).

<

Subtitles do not always appear immediately after the
language has been selected. It may be necessary to wait a
few seconds until the subtitles appear.

<

Some captions on some discs cannot be removed or changed
using this button. Additionally, a disc must have at least one
captioning language available for this to work. Some discs
may have only one sub-caption language, in which case, the
choice is obviously restricted to one subtitle or no subtitles.

<

It may be necessary to change the subtitles on some discs
using the on-screen disc menu.

<

Some discs cannot have their subtitles changed in the way
described here. If you attempt to select a different subtitle
with these discs, the “prohibit” mark is shown on screen.

DVD

Lip sync

This function allows you to adjust the synchronization of the
video and audio portions of a DVD.

Press the LIP SYNC button to display the current lip sync value
(default is 0). Use the left and right cursor buttons to adjust
the value. Positive values mean that the sound is delayed
relative to the picture.

<

Press LIP SYNC again to cancel this setting. Any other
operational display appearing on screen will also cancel this
setting. Note that lip sync should be cancelled if you need to
use the left and right cursor buttons to navigate menus, etc.

<

The lip sync value you set is stored when you turn the unit
off, and will be remembered next time you turn the unit on
again.

Display dimming

DVD VCD CD SACD DVD-A

The display on the main unit can be dimmed to suit the
environment in which you listen to music or watch video. There
are three levels and an “off” setting.
Use the FL DIMMER button to cycle between these
settings.

Note that the OFF setting is not memorized when the power is
turned off. When the unit is switched off with the display off,
and then turned on again, the display is reset to the minimum
brightness.

Advertising