Denon ADV-700 - Manuel (Page 53)

ENGLISH
53
(3) Presetting FM and AM stations
Example: Presetting FM station (currently tuned in) at preset number P03
1
Tune in the broadcast station that is to be preset and press
the Memory button.
• A “P - -” indication flashes for 10 seconds.
2
While the “P - -” indication is flashing, use the shift button and
the channel (CH) buttons (–, +) to display the preset number
“P03”.
3 Press the MEMORY button while the “P03” display is
flashing.
• The “P03” display will light and presetting will be
completed.
Presetting
• Up to 40 AM or FM stations can be preset using this procedure.
• In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when presetting stations.
• If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.
• The preset memory is not cleared when the power cord is unplugged.
(4) Listening to preset stations
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
1
Press the remote control shift button and the channel (CH)
button (–, +) and select preset number “P03”.
✽ Each press of the shift button adds 10 to the current preset number
in the range of P00 to P40.
Example:
Starting with a P13
setting, each press of
the shift button results
in the changes P13 /
P23 / P33 / P03 /
P13 /...
Example:
Starting with a P00 setting, each press of the shift button results in
the changes P00 / P10 / P20 / P30 / P40 / P10 /...
VOLUME
ENTER
BAND
MODE
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
DVD
STATUS
CDR/MD/TAPE TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
1,3
2
2
VOLUME
ENTER
BAND
MODE
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
DVD
REMOCON MODE
STATUS
CDR/MD/TAPE TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
1
1
NTSC/PAL
MEMO
Remote control unit
CH
Remote control unit
SHIFT
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
TUNER/TV/VCR
NTSC/PAL
MEMO
Remote control unit
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
TUNER/TV/VCR
CH
Remote control unit
SHIFT