Denon ADV-700 - Manuel (Page 22)

22
ENGLISH
VOLUME
ENTER
BAND
MODE
MENU
DISPLAY RETURN INPUT MODE SURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
DVD
REMOCON MODE
STATUS
CDR/MD/TAPE TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
10 SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 8 to 15), make the various
settings described below on the monitor screen using the ADV-700’s on-screen display function.
• Use the following buttons to set up the system:
System setup items and default values (set upon shipment from the factory)
Setup
Quick system
Speaker Configuration
Delay Time
Channel Level
DVD auto power off setting
Disc Setup
OSD Setup
Video Setup
Audio Setup
Ratings
Other Setup
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
LARGE for full-size, full-range) to automatically set the
composition of the signals output from the speakers and the
frequency response.
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
At the listening position, listen to the test tones output
from the different speakers and set so that the playback
level from the different speakers is equal.
The power automatically switches to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
Set the audio language, subtitle language and disc menu
language for when playing discs.
Set the on-screen display language and wallpaper for the
setup and operation screens.
Set the screen size and video system for the TV being used.
Set the digital audio signal format and the linear PCM
sampling frequency and bit conversion.
Make the playback restriction setting for DVDs with
restricted viewing and set the password required for
changing the setting.
Make the closed caption setting for DVDs. (A commercially
available decoder is required to display the closed captions.)
Setup
Default settings
Front Sp.
Small 9ft (2.7m)
Front Sp.
Small
Front & Subwoofer Center
8ft (2.4m)
Surround
7ft (2.1m) 9ft (2.7m)
Front L
0 dB
Dialog Subtitle Disc Menu
English
OSD Language Wall Paper
English
TV Aspect
4 : 3 PS
Digital Out
Normal
Rating Level
No Limit
Closed Caption : OFF
Blue
TV Type
NTSC
LPCM Select
OFF
Pass Word Change
0000 (Default)
OFF English
power does not turn off automatically
Center
0 dB
Front R
0 dB
Surround R
0 dB
Surround L
0 dB
Sub Woofer
0 dB
Center Sp.
Small
Surround Sp. A / B
Small
Sub Woofer
Yes
Sw Freq. = 120 Hz / SW mode = None
Center Sp.
Small 8ft (2.4m)
Surround Sp.
Small 7ft (2.1m)
Sub Woofer
Yes 9ft (2.7m)
System Setup
DVD Setup
(1) System setup items
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
and :Use these to move the cursors ( and ) to the left
and right on the screen.
and :Use these to move the cursors ( and ) to the up
and down on the screen.