Video output connector (video out), Power cord socket, Rs485 terminals (rs485 a/b/gnd) – Panasonic WV-BPR554 Manuel d'utilisation
Page 8
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
© Video Output Connector (VIDEO OUT)
This connector is used to connect with the VIDEO
IN connector of the monitor.
@ Power Cord Socket
This socket is used to connect the power cord
(supplied as a standard accessory).
® RS485 Terminals (RS485 A/B/GND)
These terminals are used for RS485 site communi
cation.
Connect RS485 cables to these terminals.
Cautions:
1. Connect to 12 V DC (10.5 V-16 V) or 24 V
AC (19.5 V-28 V) class 2 power supply
only. Make sure to connect the grounding
lead to the GND terminal when the power
is supplied from a 24 V AC power source.
2. To prevent fire or electric shock hazard,
use a UL listed wire VW-1, style 1007 cable
for the Input Terminal.
AC/DC Compatible Input Terminal
(DC 12V IN/AC 24V IN)
This terminal is for connecting the 12 V DC or 24 V
AC power supply cord.
-6-