Panasonic WV-BPR554 - Manuel (Page 30)

4, Gain Control Setting (AGC ON/OFF)
You can set the gain (brightness level portion of an
image) to automatic level adjustment (ON) or fixed
level (OFF).
** CAM SET HP
camera id OFF
AliC/ELC ALC
SHUTTER —
AGC
SENS UP OFF
SYNC INT
MOTION DET OFF
LENS DRIVE DC
Move the cursor to the AGC parameter and select
automatic level adjustment (ON) or fixed level (OFF),
5. Electronic Sensitivity Enhancement
(SENS UP)
There are Xwo modes for SENS UP.
AUTO: If you select x32 AUTO, for example, the
sensitivity is raised automatically to x32 max.
When AUTO is selected, AGC is automatically
set to ON.
FIX: If you select x32 FIX. for example, the sensi­
tivity is raised to just x32.
f -----------
-- \
** CAM SET UP * *
CAMERA ID OFF "1
ALC/ELC ALC
SHUTTER —
AGC ON
SENS UP ;OPP,
SYNC INT
MOTION DET OFF
LENS DRIVE DC
RET
V________
__ /
Move the cursor to the SENS UP parameter and select
the parameter for electronic sensitivity enhancement.
The preset values for SENS UP (electronic sensitivity
enhancement) change by pressing O or as fol­
lows:
O F F X 2 AUTO X4 AUTO — X6 AUTO XI0 AUTO
■ -XieAUTO-* * X32 AUTO—OFF -^X2FIX-^X4FIX —
□
CT
X6 FIX-*X10 FIX-^ X16 FIX-* X32 FIX □
Notes:
♦ When ON is selected for SUPER-D in the ALC
CONT menu, FIX is not available for this item,
• When you select AUTO for SENS UP and ON for
SUPER-D, the SENS UP function has priority so
that the SUPER-D function is not activated auto­
matically.
-28-