Panasonic WV-BPR554 - Manuel (Page 32)

6.
The VS gen-lock mode has its own menu for hori­
zontal phase adjustments. When the cable length
of the video output or the gen-lock input is
changed, the horizontal phase must be re-adjust-
ed.
The line-lock mode has its own menu for line-lock
vertical phase adjustment, tf the camera installa­
tion is relocated, check the vertical phase adjust­
ment again since the AC line phase may be differ­
ent.
f ---------- -- ^ /--------- ----------- \
** CAM SET UP ** CAM SET UP **
CAMERA ID 077 CAMERA ID 077 "1
A1X:/SLC AbC AliC/EbC AliC
SHUTTER — SHUTTER —
ASC OH к AQC OH
SENS UP 077
4
SEHS UP 077
s-rac
INT, SYNC
Ï3CTÎVB)
det OFF ИОТХОЫ DET OFF
DENS DRIVE DC LENS DRIVE DC
RET RET
V__________ __
J к
_________ V
After confirming the cursor is on EXT (VS), press
O ■ The phase adjustment menu appears on the
monitor.
6-1. VS Gen-lock Mode (EXT(VS))
1. Move the cursor to the SYNC parameter and
select INT.
2. Connect the coaxial cable for the composite sync
or composite BAA/ video signal to the gen-lock
input connector.
3. Confirm that the parameter INT changed to EXT
(VS) on the menu.
Caution: The gen-lock input signal should meet
with ElA RS-170 specifications and should not
contain jitter, such as a VCR playback signal ,
as it could disturb synchronization.
Move the cursor to H PHASE. The cursor starts
blinking.
Supply the video output signal of the camera to be
adjusted and the reference gen-lock input signal
to a dual-trace oscilloscope.
-30-