Panasonic WV-BPR554 - Manuel (Page 29)

4. Repeat step 1 to 3 to mask the desired area. To
cancel masking, move the cursor to that area and
press [U.
5.
6
.
After masking is completed, press [°] for 2 sec­
onds or longer. The ALC CONT menu appears.
If you want to change the video output level (pic­
ture contrast), move the 'T' cursor for LEVEL and
adjust the level.
Move the cursor to RET and press [1] to return to
the CAM SET UP menu. {To return to the camera
picture, move the cursor to END and press the set
button.)
3. Shutter Speed Setting (SHUTTER)
Note: When ON is selected for SUPER-D on the ALC
CONT menu, this item is not available.
To select electronic shutter speed, select OFF for
SUPER-D in the menu.
You can select an electronic shutter speed of -1/60
(OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,
or 1/10 000 seconds.
This function is effective to raise the sensitivity in low
light conditions when OFF is selected for ALC.
/ ----------- -- N
** CAM SET DP * *
CAMERA ID OFF "X
ALC/ELC ALC "X
SHUTTER
AGC OH
SENS UP OFF
SYNC IHT
MOTION DET OFF
LEMS DRIVE DC
RET
V _J
Move the cursor to the SHUTTER parameter and select
the electronic shutter speed.
The preset values for SHUTTER (electronic shutter
speed) change by pressing or as follows:
OFF (1/60)—1/100 —1/250 — 1/500
I
— 1/10 000 — 1/4 000 — 1/2 000 — 1/1 000
-27-