Tweco 7-3465 - Manuel (Page 5)

June1, 2004 / 1 Juin, 2004 5 Manual / Manuel 0-4646
8. Tighten the Through - Hole Protector Dome Nut onto the Through - Hole Protector securely by hand. Do not over-
tighten.
9. In installations using the ATC Adapter, connect the male connector on the Torch Leads to the female receptacle on the
ATC Adapter per instructions provided with the ATC Adapter.
C. Operation
1. Install the proper torch consumables.
2. Connect primary input power. Turn on the gas supply.
3. Set proper gas pressure and flow per the Torch Instruction Manual.
4. Test for proper operation.
NOTE
Every effort has been made to provide complete and accurate information in this manual. However, the
publisher does not assume and hereby disclaims any liability to any party for any loss or damage caused
by errors or omissions in this Manual, whether such errors result from negligence, accident, or any other
cause.