Tweco 7-3474 Manuel d'utilisation
General information, Supplied parts, Procedure
Date: October 1, 2004 / 1 Octobre, 2004
1
Manual / Manuel 0-2954
Manual 0-2954
ATC
TM
Remote Interface Adapter
Catalog # 7-3474
Installation Instructions
© 2002 by Thermal Dynamics Corp., Printed in USA / Imprimé dans É-U.
82 Benning Street, West Lebanon, NH 03784 USA
(603) 298-5711 • www.thermal-dynamics.com
General Information
These instructions cover the Thermal Dynamics ATC Remote Interface Adapter Kit No. 7-3474. This adapter is only
for Thermal Dynamics 1Torch
TM
torches or Lead Extensions with ATC
TM
torch connectors. The adapter provides a
simple connection for any remote control device. This adapter can be installed anywhere between the torch leads ATC
connector and the ATC receptacle at the power supply. This adapter is suitable for both Hand and Machine torches.
Supplied Parts
The kit includes:
• Adapter
• Adapter Connector (not used in all applications)
• Instructions
Procedure
WARNING
Disconnect primary input power at the source be-
fore beginning the procedure.
Art # A-03450
A. Preparation
1. Disconnect the torch leads or torch leads extension ATC male connector, if installed, from the ATC female receptacle.
Turn the locking ring to release the connector from the receptacle. Pull the connector straight out from the receptacle.
2. Connect the Thermal Dynamics Remote Pendant Control to the connector on the Remote Adapter Kit, or adapt other
remote control devices to the Kit as required. Provide a local ground connection for remote control devices requiring
grounding.