Pioneer PDX-Z9 - Manuel (Page 40)

Additional information 10
40
En
Cannot access the component
connected to the network. The component connected to the
network is not properly set. If the client is automatically authorized, you need
to enter the corresponding information again.
Check whether the connection status is set to “Do
not authorize”.
There are no playable audio files on the
component connected to the network. Check the audio files stored on the component
connected to the network.
Cannot access Windows
Media Player 11. You are currently logged onto the
domain through your PC with Windows
XP installed. Instead of logging onto the domain, log onto the
local machine (page 24).
Cannot listen to Internet radio
stations The firewall settings for components on
the network are currently in operation. Check the firewall settings for components on the
network.
You are currently disconnected from
the Internet. Check the connection settings for components on
the network, and consult with your network
service provider if necessary.
See
Setting up the network on page 30.
The broadcasts from an Internet radio
station are stopped or interrupted. There are cases where you cannot listen to some
Internet radio stations even when they are listed
in the list of Internet radio stations on this
receiver.
The folders/files stored on a
USB memory device are not
displayed. The folders/files are currently stored in
a region other than the FAT (File
Allocation Table) region. Store the folders/files in the FAT region.
The number of levels in a folder is more
than 8. Limit the maximum number of levels in a folder to
8 (page 27).
There are more than 2000 folders/files
stored in a single folder. Limit the maximum number of folders/files stored
in a single folder to 2000 (page 27).
The audio files are copyrighted. Copyrighted audio files stored on a USB memory
device cannot be played back (page 27).
A USB memory device is not
recognized. The USB memory device does not
support the mass storage class
specifications. Try using a USB memory device compatible with
the mass storage class specifications. Note that
there are cases where even the audio files stored
on a USB memory device compatible with the
mass storage class specifications are not played
back on this receiver (page 21).
Connect the USB memory device and switch on
this receiver (page 21).
A USB hub is currently being used. This receiver does not support a USB hub
(page 21).
This receiver recognizes the USB
memory device as a fraud. Switch off and on again this receiver.
A USB memory device is
connected and displayed, but
the audio files stored on the
USB memory device cannot
be played back. Some formats of a USB memory
device, including FAT 12, NTFS, and
HFS, cannot be played back on this
receiver. Check whether the format of your USB memory
device is either FAT 16 or FAT 32. Note that the FAT
12, NTFS, and HFS formats cannot be played back
on this receiver (page 21).
The file format cannot be properly
played back on this receiver. See the list of file formats that can be played back
on this receiver.
Symptoms Causes Remedies
PDX-Z9.book 40 ページ ２００８年２月２６日 火曜日 午後６時３２分