Pioneer PDX-Z9 - Manuel (Page 39)

English
Français
Additional information 10
39
En
Home Media Gallery
Symptoms Causes Remedies
Cannot access the network. The LAN cable is not firmly connected. Firmly connect the LAN cable (see page 21).
The router is not switched on. Switch on the router.
Internet security software is currently
installed in the connected component. There are cases where a component with Internet
security software installed cannot be accessed.
The audio component on the network
which has been switched off is
switched on. Switch on the audio component on the network
before switching on this receiver.
Playback does not start while
‘Connecting…’ continues to
be displayed.
The component is currently
disconnected from this receiver or the
power supply. Check whether the component is properly
connected to this receiver or the power supply.
The PC or Internet radio is not
properly operated. The corresponding IP address is not
properly set. Switch on the built-in DHCP server function of
your router, or set up the network manually
according to your network environment.
See Setting up the network on page 30.
The IP address is being automatically
configured. The automatic configuration process takes time.
Please wait.
The audio files stored on
components on the network,
such as a PC, cannot be
played back. Windows Media Player 11 is not
currently installed on your PC. Install Windows Media Player 11 on your PC (see
page 22).
Audio files were recorded in formats
other than MP3, WAV (LPCM only),
MPEG-4 AAC, FLAC, and WMA. Play back audio files recorded in MP3, WAV
(LPCM only), MPEG-4 AAC, FLAC, or WMA. Note
that some audio files recorded in these formats
may not be played back on this receiver.
Audio files recorded in MPEG-4 AAC or
FLAC are being played back on
Windows Media Player 11 or Windows
Media Connect. Audio files recorded in MPEG-4 AAC or FLAC
cannot be played back on Windows Media Player
11 or Windows Media Connect. Try using another
server.
Refer to the operation manual supplied with your
server.
The component connected to the
network is not properly operated. Check whether the component is affected by
special circumstances or is in the sleep mode.
Try rebooting the component if necessary.
The component connected to the
network does not permit file sharing. Try changing the settings for the component
connected to the network.
The folder stored on the component
connected to the network has been
deleted or damaged. Check the folder stored on the component
connected to the network.
Audio playback is undesirably
stopped or disturbed. The audio file currently being played
back was not recorded in a format
playable on this receiver. Check whether the audio file was recorded in a
format supported by this receiver (page 29).
Check whether the folder has been damaged or
corrupted.
Note that there are cases where even the audio
files listed as playable on this receiver cannot be
played back or displayed.
The LAN cable is currently
disconnected. Connect the LAN cable properly.
There is heavy traffic on the network
with the Internet being accessed on the
same network. Use 100BASE-TX to access the components on
the network.
PDX-Z9.book 39 ページ ２００８年２月２６日 火曜日 午後６時３２分