Pioneer PDX-Z9 - Manuel (Page 33)

English
Français
Adjusting the sound 07
33
En
Chapter 7
Adjusting the sound
Switching Sound modes
You can add exciting effects to audio sources. 1
Sound mode settings are saved separately for each
function.
• Press SOUND during playback of an audio source
to switch Sound modes.
You can choose from the following Sound modes:
• VIVID – For lively, sharp sound.
• EXCITING – For dynamic, stimulating sound.
• RELAXING – For laid-back sound.
• Off – Revert sound to its natural state.
Adjusting the bass and treble
Use the bass and treble controls to adjust the overall tone.
• Adjust the bass and treble by pressing BASS +/–,
TREBLE +/–.
You can adjust low and high sounds on a scale of –6 to +6 .
Using the Loudness function
Used to get good bass and treble from music sources at
low volumes.
• Press LOUDNESS to switch on or off.
Using the Sound Retriever
• Default setting: On ( FRONT AUDIO IN and HOME
MEDIA GALLERY functions) / Off (all other
functions)
When audio data is removed during the WMA/MP3/
MPEG-4 AAC compression process, sound quality often
suffers from an uneven sound image. The Sound
Retriever feature employs new DSP technology that
helps bring CD quality sound back to compressed 2-
channel audio by restoring sound pressure and
smoothing jagged artifacts left over after compression.
2
Sound Retriever settings are saved separately for each
playback function.
• During playback, press S.RETRIEVER to switch
the sound retriever on or off.
Using Digital Noise Reduction
May improve the quality of sound in a noisy source (for
example, cassette or video tape with lots of background
noise) when switched on.
3
Digital Noise Reduction settings are saved separately for
each function.
• Press DIGITAL NR to switch on or off.
Confirming audio settings
You can make various audio settings.
• Press STATUS.
A listing of the audio settings will be displayed.
Note
1 • You cannot change sound modes during the playback of SACD sources.
• When Sound mode is set to any mode other than OFF, the Sound Retriever and Digital Noise Reduction are turned OFF.
2 • The Sound Retriever settings cannot be changed during SACD playback.
• When Sound Retriever is set to ON, sound mode and digital noise reduction are turned OFF.
3 • When Digital Noise Reduction is set to ON, Sound mode and Sound Retriever are turned OFF.
• Digital Noise Reduction cannot be switched when functions other than PHONO , LINE , and TUNER are selected.
PDX-Z9.book 33 ページ ２００８年２月２６日 火曜日 午後６時３２分