Electrolux EOC6841AOX - Manuel (Page 37)

1
2
10. Carefully lift (step 1) and remove (step
2) the glass panels one by one. Start
from the top panel.
11. Clean the glass panels with water
and soap. Dry the glass panels care-
fully.
Installing the door and the glass panels
A B C
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a deco-
rative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the top panel in
the seats correctly.
13. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up. The appliance is deactiva-
ted. Activate the appliance.
ENGLISH 37